Hercules Barrel Handling Solutions

IMPORTANT:  Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
• All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.

These drum dispensers allow you to tilt drum 360 in either direction. Lift and invert drum with drum faucet in place.

Drum carrier manual tilt control options

• Kontrol-Karriers have pull chain and chain wheel drum tilt control (shown above left)
• Drum Karriers require manually turning drum by hand
• Available with optional hand crank drum tilt control
• Also available with 16" (41 cm) hand wheel drum tilt control

Below the hook drum carriers to tilt and pour drum with your hoist or crane - Drum Tilters - Morse Kontrol-Karriers. More than just a drum inverter or drum dumper... ...drum carriers for controlled Drum Dispensing.

Additional Information:

• Delivery Time: 1 to 2 months

IMPORTANT:  Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
• All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.

These drum dispensers allow you to tilt drum 360 in either direction. Lift and invert drum with drum faucet in place.

Drum carrier manual tilt control options

• Kontrol-Karriers have pull chain and chain wheel drum tilt control (shown above left)
• Drum Karriers require manually turning drum by hand
• Available with optional hand crank drum tilt control
• Also available with 16" (41 cm) hand wheel drum tilt control

Below the hook drum carriers to tilt and pour drum with your hoist or crane - Drum Tilters - Morse Kontrol-Karriers. More than just a drum inverter or drum dumper... ...drum carriers for controlled Drum Dispensing.

IMPORTANT:  Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
• All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.

These drum dispensers allow you to tilt drum 360 in either direction. Lift and invert drum with drum faucet in place.

Drum carrier manual tilt control options

• Kontrol-Karriers have pull chain and chain wheel drum tilt control (shown above left)
• Drum Karriers require manually turning drum by hand
• Available with optional hand crank drum tilt control
• Also available with 16" (41 cm) hand wheel drum tilt control

Below the hook drum carriers to tilt and pour drum with your hoist or crane - Drum Tilters - Morse Kontrol-Karriers. More than just a drum inverter or drum dumper... ...drum carriers for controlled Drum Dispensing.

IMPORTANT:  Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
• All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Use these below the hook drum carriers with your hoist or crane to control the pour of drum contents, rather than simply dump the entire contents with a drum inverter.

These drum dispensers allow you to tilt drum 360 in either direction. Lift and invert drum with drum faucet in place.

Drum carrier manual tilt control options

• Kontrol-Karriers have pull chain and chain wheel drum tilt control (shown above left)
• Drum Karriers require manually turning drum by hand
• Available with optional hand crank drum tilt control
• Also available with 16" (41 cm) hand wheel drum tilt control

Below the hook drum carriers to tilt and pour drum with your hoist or crane - Drum Tilters - Morse Kontrol-Karriers. More than just a drum inverter or drum dumper... ...drum carriers for controlled Drum Dispensing.

• Each model works with a range of drum sizes
  (see chart below)
• Engages under top rim of drum
• Works with rimmed steel, plastic or fiber drum
• Enables placing a drum into a salvage drum
• Capacity: 1,000 Lb. (454 kg)

92 Series Below-Hook Drum Lifters for rimmed steel, plastic or fiber drum.

Model 92 shown right.

How to select the correct drum lifter

Below-Hook Drum Lifters
Lift a Drum with Your Crane
The Handles are just for placing the lifter onto the drum.

• Each model works with a range of drum sizes
  (see chart below)
• Engages under top rim of drum
• Works with rimmed steel, plastic or fiber drum
• Enables placing a drum into a salvage drum
• Capacity: 1,000 Lb. (454 kg)

92 Series Below-Hook Drum Lifters for rimmed steel, plastic or fiber drum.

Model 92 shown right.

How to select the correct drum lifter

Model 92 has self-adjusting tong-like action when you raise the hook, to lift a rimmed steel, plastic or fiber / cardboard drum.

Manually center drum lifter on top of your drum and adjust it to drum width. It then grips various common types of closed head drums. Lift a drum from four-drum pallets or rows of adjacent drums.

• Steel or Plastic rimmed drum 18" to 26" (46 to 66 cm) diameter
• Typical plastic rimmed 30 to 55-gallon drum (114 to 210 liter drum)
• Fiber drum (cardboard drum) 18.5" to 23" ID (47 to 87.4 cm ID), 19" to 23.5" OD (48.3 to 59.7 cm OD) with lever-lock
• Steel salvage 85-gallon (322 liter) or overpack drum (NOT for plastic overpack)

Capacity: 1,000 Lb. (454 kg).

NOTE: Bottom of the drum rim must be within 1" of the top of the drum. Drum lid must be on and properly secured.

Weight of drum contents must not exceed drum manufacturer's packing limit.

• Each model works with a range of drum sizes
  (see chart below)
• Engages under top rim of drum
• Works with rimmed steel, plastic or fiber drum
• Enables placing a drum into a salvage drum
• Capacity: 1,000 Lb. (454 kg)

92 Series Below-Hook Drum Lifters for rimmed steel, plastic or fiber drum.

Model 92 shown right.

How to select the correct drum lifter

Below-Hook Drum Lifters
Lift a Drum with Your Crane
The Handles are just for placing the lifter onto the drum.

• Each model works with a range of drum sizes
  (see chart below)
• Engages under top rim of drum
• Works with rimmed steel, plastic or fiber drum
• Enables placing a drum into a salvage drum
• Capacity: 1,000 Lb. (454 kg)

92 Series Below-Hook Drum Lifters for rimmed steel, plastic or fiber drum.

Model 92 shown right.

How to select the correct drum lifter

Model 92 has self-adjusting tong-like action when you raise the hook, to lift a rimmed steel, plastic or fiber / cardboard drum.

Manually center drum lifter on top of your drum and adjust it to drum width. It then grips various common types of closed head drums. Lift a drum from four-drum pallets or rows of adjacent drums.

• Steel or Plastic rimmed drum 18" to 26" (46 to 66 cm) diameter
• Typical plastic rimmed 30 to 55-gallon drum (114 to 210 liter drum)
• Fiber drum (cardboard drum) 18.5" to 23" ID (47 to 87.4 cm ID), 19" to 23.5" OD (48.3 to 59.7 cm OD) with lever-lock
• Steel salvage 85-gallon (322 liter) or overpack drum (NOT for plastic overpack)

Capacity: 1,000 Lb. (454 kg).

NOTE: Bottom of the drum rim must be within 1" of the top of the drum. Drum lid must be on and properly secured.

Weight of drum contents must not exceed drum manufacturer's packing limit.

• Each model works with a range of drum sizes
  (see chart below)
• Engages under top rim of drum
• Works with rimmed steel, plastic or fiber drum
• Enables placing a drum into a salvage drum
• Capacity: 1,000 Lb. (454 kg)

92 Series Below-Hook Drum Lifters for rimmed steel, plastic or fiber drum.

Model 92 shown right.

How to select the correct drum lifter

Below-Hook Drum Lifters
Lift a Drum with Your Crane
The Handles are just for placing the lifter onto the drum.

• Each model works with a range of drum sizes
  (see chart below)
• Engages under top rim of drum
• Works with rimmed steel, plastic or fiber drum
• Enables placing a drum into a salvage drum
• Capacity: 1,000 Lb. (454 kg)

92 Series Below-Hook Drum Lifters for rimmed steel, plastic or fiber drum.

Model 92 shown right.

How to select the correct drum lifter

Model 92 has self-adjusting tong-like action when you raise the hook, to lift a rimmed steel, plastic or fiber / cardboard drum.

Manually center drum lifter on top of your drum and adjust it to drum width. It then grips various common types of closed head drums. Lift a drum from four-drum pallets or rows of adjacent drums.

• Steel or Plastic rimmed drum 18" to 26" (46 to 66 cm) diameter
• Typical plastic rimmed 30 to 55-gallon drum (114 to 210 liter drum)
• Fiber drum (cardboard drum) 18.5" to 23" ID (47 to 87.4 cm ID), 19" to 23.5" OD (48.3 to 59.7 cm OD) with lever-lock
• Steel salvage 85-gallon (322 liter) or overpack drum (NOT for plastic overpack)

Capacity: 1,000 Lb. (454 kg).

NOTE: Bottom of the drum rim must be within 1" of the top of the drum. Drum lid must be on and properly secured.

Weight of drum contents must not exceed drum manufacturer's packing limit.

• Each model works with a range of drum sizes
  (see chart below)
• Engages under top rim of drum
• Works with rimmed steel, plastic or fiber drum
• Enables placing a drum into a salvage drum
• Capacity: 1,000 Lb. (454 kg)

92 Series Below-Hook Drum Lifters for rimmed steel, plastic or fiber drum.

Model 92 shown right.

How to select the correct drum lifter

Below-Hook Drum Lifters
Lift a Drum with Your Crane
The Handles are just for placing the lifter onto the drum.

• Each model works with a range of drum sizes
  (see chart below)
• Engages under top rim of drum
• Works with rimmed steel, plastic or fiber drum
• Enables placing a drum into a salvage drum
• Capacity: 1,000 Lb. (454 kg)

92 Series Below-Hook Drum Lifters for rimmed steel, plastic or fiber drum.

Model 92 shown right.

How to select the correct drum lifter

Model 92 has self-adjusting tong-like action when you raise the hook, to lift a rimmed steel, plastic or fiber / cardboard drum.

Manually center drum lifter on top of your drum and adjust it to drum width. It then grips various common types of closed head drums. Lift a drum from four-drum pallets or rows of adjacent drums.

• Steel or Plastic rimmed drum 18" to 26" (46 to 66 cm) diameter
• Typical plastic rimmed 30 to 55-gallon drum (114 to 210 liter drum)
• Fiber drum (cardboard drum) 18.5" to 23" ID (47 to 87.4 cm ID), 19" to 23.5" OD (48.3 to 59.7 cm OD) with lever-lock
• Steel salvage 85-gallon (322 liter) or overpack drum (NOT for plastic overpack)

Capacity: 1,000 Lb. (454 kg).

NOTE: Bottom of the drum rim must be within 1" of the top of the drum. Drum lid must be on and properly secured.

Weight of drum contents must not exceed drum manufacturer's packing limit.

Morse model 80i and 80i-SS Mobile-Karriers provide remarkable versatility! Morse mobile drum carriers bear the full weight your drum. They allow you to rotate the drum 360 degrees, lock the tilt angle of a raised drum, and dispense drum.

• For safety, lock drum in vertical position to prevent spills while transporting
• Lock drum in horizontal or at 45 degrees for pouring
• Lock at 45 degrees for access to drum contents
• When unlocked, the drum may be turned end-over-end to agitate contents or tipped and held manually at any angle

The mobile drum carrier is simple to move and steer on its 8" (20.3 cm) diameter "MORTUF" polyolefin roller bearing wheels and 4" (10.2 cm) diameter swivel caster.

• Capacity: 800 Lb. (363 kg)
• Handles 55-gallon (210 liter) ribbed steel drum
• Accepts options for plastic or fiber drum
• Install correct size Diameter Adaptor for various smaller drums
• Shipped partly unassembled to save freight cost
• Manufactured in our single factory in East Syracuse, NY U.S.A.

Easy to lift, move and pour drum

1. Secure drum in holder with web strap and ratchet
2. To raise drum, grip handle to squeeze release rods, and pull down
3. Drum locks upright for safe transport
4. Release locks and tilt drum by hand
5. Lock drum in various positions
   • Upright for safe transport
   • Horizontal to dispense into 5-gallon (20 liter) pail
   • Lock drum at 45 degrees for pouring
   • Lock drum at 45 degrees for access to contents

Additional Information:

• Delivery Time: 1 to 2 months