Hercules Barrel Handling Solutions

Standard’s 700DD Series pumps are designed to transfer viscous materials from drums, Intermediate Bulk Containers (IBC) and large storage vessels. Utilizing the principle of positive displacement, these pumps deliver a continuous flow of material with little product degradation. Pumps are available with a TEFC electric or air powered motors. Maximum viscosity is 100,000 cps (mPas).

Common Applications
··Polymers
··Oil & Greases
··Resins
··Paints
··Adhesives
··Varnishes

Features
··Easy To Clean & Maintain
··Interchangeable Motor Drives
··Continuous Flow
··Low Shearing Properties
··Threaded Component

Technical Specifications

Immersion Lengths: 27" (700 mm), 39" (1000 mm) or 47" (1200 mm)
Stator Material: PTFE or White Buna
Motor Drives: TEFC (IP55) or Air
Duty Cycle: Continuous
Maximum Viscosity: 100,000 cps (mPAS)
Maximum Discharge Pressure: 174 psi (12 bar)
Maximum Flow Rate: 12 GPM (45 LPM) based on water

Standard’s 700SR Series pumps are engineered to transfer viscous materials from drums and Intermediate Bulk Containers (IBC). The progressive cavity design delivers a continuous flow of material with little product degradation. Pumps are available with TEFC and Hazardous Duty motors. Maximum viscosity is 25,000 cps (mPas).

Features

··Easy To Clean & Maintain
··Interchangeable Motor Drives
··Continuous Flow
··Low Shearing Properties
··Threaded Component

Common Applications

··Polymers
··Oil & Greases
··Resins
··Paints
··Adhesives
··Varnishes

Technical Specifications

Immersion Lengths: 27" (700 mm), 39" (1000 mm) or 47" (1200 mm)
Stator Material: PTFE, Viton® or Buna-N
Motor Drives: Variable Speed TEFC (IP54) & Explosion Proof
Duty Cycle: Intermittent
Maximum Viscosity: 25,000 cps (mPAS)
Maximum Discharge Pressure: 174 psi (12 bar)
Maximum Flow Rate: 12 GPM (45 LPM) based on water

STANDARD’s Batch Control System (BCS) is engineered to control, measure and dispense preset volumes of liquid from drums, IBC’s, plating tanks or any large storage vessel. The BCS can be used in an industry where batching, chemical packaging or dilution is required to be accurate and efficient. Simply dial in the desired volume, press ENTER and the BCS delivers a preset volume of liquid virtually hands-free.

Features

··Turbine Paddle Wheel Design
··Measures: Gallons, Liters, Cubic Meters
··Resettable Totalizer
··User Friendly “In Field” Calibration
··7 Pre-Set Batches
··PP & PVDF Materials of Construction
··Relay Output Signal

Common Applications

··Chemical Packaging
··Water Treatment Chemicals
··Chemistry For Plating Tanks
··Chemical Delivery

echnical Specifications
Motor Drive: Open Drip Proof (IP44) or TEFC (IP54) (110–120v / 220–240v)
Flow Range: 4 GPM (15,2 LPM) – 27 GPM (102,2 LPM)
Maximum Viscosity: 300 cps (mPas)
Immersion Length: 27" (700 mm), 39" (1000 mm), 47" (1200 mm), 60" (1500 mm) or 72" (1800 mm)
Accuracy: +/– 0.61% of Full Scale +/– 1% of Reading
Maximum Temperature: Polypropylene 130º F (55º C) PVDF 175º F (80º C)

Standard Pump’s Aluminum Pump Package is designed to transfer non-corrosive liquids such as machining lubricants and light oils from barrels and Tote® tanks. This package has been engineered to be light weight and portable while still maintaining a robust quality and high flow rate.

Features

· Variable Speed Electric Motor (110V or 220V)
· Sealless Design
· Light Weight and Portable
· Runs Dry
· Available Lengths: 39" (1000 mm) & 47" (1200 mm)

Common Applications (Drum Transfer)

· Light Machining Oils
· Hydraulic Fluid
· Motor Oil (up to 30 wt.)
· Antifreeze
· Lubricating Oils

Standard Pump’s Aluminum Filter Pump Package has been engineered to transfer and filter non-corrosive liquids such as machining lubricants and light oils from barrels and Tote® tanks. The integrated filter system enables the operator to safely remove contaminants from the liquid during the pumping process.

Features

· Variable Speed Electric Motor (110V or 220V)
· Sealless Design
· Light Weight and Portable
· Runs Dry
· Filter Sizes 3, 10 & 25 Micron
· Available Lengths: 39" (1000 mm) & 47" (1200 mm)

Features

· Variable Speed Electric Motor (110V or 220V)
· Sealless Design
· Light Weight and Portable
· Runs Dry
· Filter Sizes 3, 10 & 25 Micron
· Available Lengths: 39" (1000 mm) & 47" (1200 mm)

Standard Pump’s Aluminum Pump Package is designed to transfer non-corrosive liquids such as machining lubricants and light oils from barrels and Tote® tanks. This package has been engineered to be light weight and portable while still maintaining a robust quality and high flow rate.

Features

· Compressed Air Motor
· Sealless Design
· Light Weight and Portable
· Runs Dry
· Available Lengths: 39" (1000 mm) & 47" (1200 mm)

Common Applications (Drum Transfer)

· Light Machining Oils
· Hydraulic Fluid
· Motor Oil (up to 30 wt.)
· Antifreeze
· Lubricating Oils

Standard Pump’s Aluminum Filter Pump Package has been engineered to transfer and filter non-corrosive liquids such as machining lubricants and light oils from barrels and Tote® tanks. The integrated filter system enables the operator to safely remove contaminants from the liquid during the pumping process.

Features

· Compressed Air Motor
· Sealless Design
· Light Weight and Portable
· Runs Dry
· Filter Sizes 3, 10 & 25 Micron
· Available Lengths: 39" (1000 mm) & 47" (1200 mm)

Common Applications (Drum Transfer)

· Light Machining Oils
· Hydraulic Fluid
· Motor Oil (up to 30 wt.)
· Antifreeze
· Lubricating Oils

Engineered to transfer viscous materials from drums and Intermediate Bulk Containers (IBC). The progressive cavity design delivers a continuous flow of material with little product degradation. Pumps are available with TEFC and Hazardous Duty motors. Maximum viscosity is 25,000 cps (mPas).

Features
··Easy To Clean & Maintain
··Interchangeable Motor Drives
··Continuous Flow
··Low Shearing Properties
··Threaded Component

APPLICATIONS

Common applications include:

STANDARD’s Batch Control System (BCS) is engineered for precision dosing and filling operations containing viscous materials. The Batch Control System is constructed with robust materials and a choice of motor drives, providing versatility and safety for the most challenging applications. Simply dial in desired volume, press ENTER, and the BCS delivers a preset volume of material virtually hands-free.

Features

·· Oval Gear Design
·· Measures: Gallons, Liters, Cubic Meters
·· Resettable Totalizer
·· User Friendly “In Field” Calibration
·· Pre-Set Batches
·· Remote Start Capabilities
·· Relay Output Signal

Common Applications

·· Polymers
·· Oils
·· Varnishes (Non-Flammable)
·· Paints
·· Resins
·· Petroleum Products

Technical Specifications

Motor Drive: TEFC (IP54) (110–120v / 220–240v)
Maximum Discharge Pressure: 87 psi (6 bar)
Flow Range: 2.6 GPM (9,8 LPM) – 12 GPM (45 LPM)
Immersion Length: 39" (1000 mm) or 47" (1200 mm)
Maximum Viscosity: 25,000 cps (mPas)
Accuracy: +/– 0.63% of Full Scale +/– 1% of Reading
Maximum Temperature: 176º F (80º C)

STANDARD’s Batch Control System (BCS) is engineered to control, measure and dispense preset volumes of liquid from drums, IBC’s, plating tanks or any large storage vessel. The air systems are ideal for high frequency, continuous duty applications. The BCS can be used in an industry where batching, chemical packaging or dilution is required to be accurate and efficient. Simply dial in the desired volume, press ENTER and the BCS delivers a preset volume of liquid virtually hands-free.

Features

··Turbine Paddle Wheel Design
··Measures: Gallons, Liters, Cubic Meters
··Resettable Totalizer
··User Friendly “In Field” Calibration
··7 Pre-Set Batches
··PP & PVDF Materials of Construction
··Relay Output Signal

Common Applications

··Chemical Packaging
··Water Treatment Chemicals
··Chemistry For Plating Tanks
··Chemical Delivery

Technical Specifications

Motor Drive: Air, 1/2 HP (370 W) (110–120v / 220–240v)
Flow Range: 4 GPM (15,2 LPM) – 27 GPM (102,2 LPM)
Maximum Viscosity: 300 cps (mPas)
Immersion Length: 27" (700 mm), 39" (1000 mm), 47" (1200 mm), 60" (1500 mm) or 72" (1800 mm)
Accuracy: +/– 0.61% of Full Scale +/– 1% of Reading
Maximum Temperature: Polypropylene 130º F (55º C) PVDF 175º F (80º C)

STANDARD’s Batch Control System (BCS) is engineered for precision dosing and filling operations containing viscous materials. The air systems are ideal for high frequency, continuous duty applications. The Batch Control System is constructed with robust materials and a choice of motor drives, providing versatility and safety for the most challenging applications. Simply dial in desired volume, press ENTER, and the BCS delivers a preset volume of material virtually hands-free.

Features

·· Oval Gear Design
·· Measures: Gallons, Liters, Cubic Meters
·· Resettable Totalizer
·· User Friendly “In Field” Calibration
·· Pre-Set Batches
·· Remote Start Capabilities
·· Relay Output Signal

Common Applications

·· Polymers
·· Oils
·· Varnishes (Non-Flammable)
·· Paints
·· Resins
·· Petroleum Products

Technical Specifications

Motor Drive: Air, 2 HP (1,5 KW) (110–120v / 220–240v)
Maximum Discharge Pressure: 87 psi (6 bar)
Flow Range: 2.6 GPM (9,8 LPM) – 12 GPM (45 LPM)
Immersion Length: 39" (1000 mm) or 47" (1200 mm)
Maximum Viscosity: 25,000 cps (mPas)
Accuracy: +/– 0.63% of Full Scale +/– 1% of Reading
Maximum Temperature: 176º F (80º C)

Additional Information:

• Delivery Time: 1 to 2 months